Welcome to the website. +86-13953285555
1.The hardness of the material. The harder the material, the more difficult it is to Raymond grind, and the more severe the
wear and tear on the equipment. Raymond grinding speed is slow, of course, Raymond grinding capacity is small.
Grinding of gold ore：
2. The humidity of the material, that is, when the moisture contained in the material is relatively large, the material is easy to adhere to the Raymond mill and is also prone to blockage during the unloading and conveying process, resulting in a reduction in the Raymond grinding capacity.
3. The fineness of the material after Raymond milling is required to be high, that is, the finer the material required to be ground by Raymond milling, the smaller the Raymond milling capacity.
4. The composition of the material. The more fine powder contained in the material before Raymond milling, the more it will affect the Raymond milling, because these fine powders are easy to adhere and affect transportation. For those with a large amount of fine powder, it should be sieved in advance.
5. The viscosity of the material. That is, the greater the viscosity of the material, the easier it is to adhere.
6. The better the wear resistance of the Raymond grinding parts (hammer head, jaw plate) of the Raymond mill, the greater the Raymond grinding capacity. If it is not wear-resistant, it will affect the Raymond grinding capacity.
"Quality first and customer first" is our eternal service tenet. "Integrity-based" is our corporate morality.
