Raymond mill is a common industrial equipment used to grind a variety of materials. However, sometimes we may encounter the problem of low production of Raymond mill, which will not only affect the work efficiency, but also increase the production cost. Here are some ways to solve the low yield of Raymond mill:1. Adjust the feed amountThe yield of Raymond mill is directly related to the feed quantity. If the feed amount is too little, the ground out of the material is insufficient, resulting in low output. If the amount of feed is too large, it will increase the risk of energy consumption and equipment damage. Therefore, we need to adjust the feed amount according to the specific situation to find the best production efficiency.2. Replace the grinding roller and ringThe roller and ring are the core parts of Raymond mill, and if they are worn or damaged, it will lead to low production. Therefore, regular inspection and replacement of rolls and rings is the key to maintaining a stable Raymond mill yield.3. Adjust the wind speed and volumeWind speed and air volume are important factors affecting the production of Raymond mill. If the wind speed and air volume are not appropriate, it will cause the material to stay in the mill for too long or too short, affecting the grinding effect. Therefore, we need to adjust the wind speed and air volume according to the specific situation to obtain the best production efficiency.4. Clean the dust collector and pipesThe dust collector and pipe of Raymond mill may accumulate dust and materials due to long-term use, resulting in poor ventilation and affecting the yield. Therefore, we need to clean the dust collector and pipe regularly to ensure smooth ventilation and maintain the normal working condition of Raymond mill.In short, it is very important to keep the output of Raymond mill stable, which requires us to take corresponding measures according to the actual situation. In addition to the above methods, there are many other ways to improve the output of Raymond mill, we need to choose the appropriate method according to the specific situation to achieve the best production efficiency.
Raymond mill in the process of use, there may be rust. This is mainly due to the following reasons:Cause one: The humidity is too highIf the Raymond mill is in a humid environment for a long time, it is prone to rust. Therefore, during use, try to avoid putting it in a wet place.Reason two: Lack of maintenanceIf it is not maintained for a long time, the surface of the mill is prone to oxidation, resulting in rust. Therefore, in the process of use, it is necessary to carry out regular maintenance of the mill, including cleaning and applying anti-rust oil.Reason three: improper useIf the grinding machine is not used and stored correctly, it will lead to scratches and wear on the surface, thus accelerating the rust process.So, when there is a Raymond mill rust, how should we deal with it?Treatment method one: Clean the surfaceIf there is slight rust on the surface of the mill, you can use detergent and wire brush to clean, remove the rust, and apply a layer of anti-rust oil on the surface.Solution 2: Replace the partsIf there is more serious rust on the surface of the mill, it is recommended to replace the parts with more serious rust, so as not to affect the normal use of the mill.Treatment method three: regular maintenanceIn order to avoid the rust of the mill, we should carry out regular maintenance on it. Specific operations include: clean the surface of the mill, apply anti-rust oil, check the wear of parts and so on.In short, the rust problem of Raymond mill can be avoided. As long as we pay attention to maintenance and use during use, we can ensure its normal operation and extend its service life.