Pendulum mill

• sjhl

Since the material to be ground contains water and evaporates into gas during the grinding process, and the gas leaks into the air duct from the flange joints in the entire pipeline, the air volume in the circulating air path increases. This increased air volume will The residual air duct in the middle of the main machine of the blower is introduced into the small cyclone collector. Some fine powder brought in with the wind flow is collected by the small cyclone and discharged through another powder outlet pipe. The gas is collected by the small cyclone and then emptied.

1.R-Type Pendulum Mill is suitable for processing gypsum, calcite, limestone, barite, fluorite, apatite, feldspar and quartz, with the hardness of no more than 7 grades, 

2. Grinding and processing various non-flammable and explosive mineral materials with the humidity below 6%. 

3. The lumpy material is crushed to a particle size of 0-30mm, The elevator transports the material vertically to the inside of the storage hopper, and then the electromagnetic vibrating feeder feeds the material quantitatively, evenly and continuously into the host machine to start grinding.

Technical parameters of R-Type Pendulum Mill 

Model	6R4525	5R4119	4R 3216	3R 2714
Particle size of feeding (mm)	≤30	≤25	≤25	≤25
Particle size of finished product (mm)	0.125-0.044	0.125-0.044	0.125-0.044	0.125-0.044
Yield of materials with different fitness (t)	4-12	2-6.3	1-3.2	0.5-1.6
Rotating speed of center shaft (r/min)	90	105	130	160
Diameter of grinding ring (mm)	1520	1400	1070	970
Diameter of grinding roller (mm)	450	410	320	270
Height of grinding roller (mm)	250	190	160	160
Host motor	y315m-4-132	y280s-4-75	y225s-4-37	y225m-8-30
Fan motor	y315m-4-132	y250m-4-75	y200L-4-37	y180m-4-22
Motor of analyzer	y160m-4-11	Y132-4-7.5	y132-4-5.5	y112-4-4

• Share this post :